Anet ET4 Easy Build kit: 220 x 220 x 250 print volume. Universally compatible with all branded filaments and easily to assemble as parts are pre-build. Great general purpose 3D Printer for an affordable price!
The Anet ET4 is a quick-assembly printer made from a combination of aluminum extrusions, aluminum chassis and a high quality brushed aluminum x-gantry. No more fiddling around with small nuts and bolts, this printer assembles in minutes!
In addition, the printer has "power resume" capability (in case of power cut). Popular slic3ing software like Slic3r, Cura and Simplify 3D will work with this printer.
|Bed width||22 cm|
|Bed Depth||22 cm|
|Build Height||25 cm|
|Resolution Z axis||0.1 mm|
|Number of extruders||1|
|Filament diameter||1.75 mm|
|Max. hot-end temperature||250 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Max. heated bed. temp.||100 °C|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
|Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.